Worm Gear - NL605
 |
Worm Gear  |
Pole
and Hook
|
|
Size Options:
Most sizes are available from our standard range, however specific design
requirements can be met to suit your needs.
Insulation:
Cork or Pvc insulation can be fitted to the base kerb, as an option, to suit
your requirements.
Glazing Options:
Thermoformed rooflights - Single, Twin or Triple skin
applications from our standard range, 3mm U/V protected outer skin / 3mm
thick inner skin. Comes with a manufacturers discolouration and impact
resistance guarantees.
Glass - Most applications can be incorporated.
Fixing Details:
The kerb is supplied fully assembled ready for fitment to roof structures,
the kerb should be fixed at the corners then 300mm centres. Thermoformed
Roof lights - Are supplied separately to kerb and should be bolted to the
opening frame, sealer washers, caps and roofing bolts with nuts are supplied
as standard for this purpose. Glass - Applications will be riveted or security
bolted as required.
Cleaning / Maintenance:
Cleaning - Thermoformed roof lights should be washed down with a mild detergent and warm water. Do not use abrasives.
Maintenance - Annually check mechanical components, and lubricate where necessary, acutate components
Other options available:
This unit can be supplied in an ‘Adaptor kerb profile’ (see data sheet)
burglar bars and security fixings are available on request
Points to check prior to advising us
of your requirements:
When placing an order / enquiry, please be sure to not the roof opening size,
and where possible, the width of the upstand kerb.