Plain Kerb - NL609
METAL |
GRP |
Size Options:
Most sizes are available from our standard range, however,
specific design requirements can be met to suit your needs.
Insulation:
Foam or PVC insulation can be fitted to base
kerb, as an option, to suit your requirements.
Glazing Options:
Thermoformed rooflights - Twin or single
skin applications from our standard range, 3mm UV protected outer skin /
3mm thick inner skin. Comes with manufacturers discolouration and impact
resistance guarantees. Glass - Most applications can be
incorporated.
Fixing Details:
The kerb is supplied fully assembled ready for fitment to roof structures,
kerb should be fixed at corners then 300mm centres. Thermoformed rooflights -
Are supplied separately to kerb and should be bolted to opening frame - sealer
washers, caps & roofing bolts with nuts are supplied as standard for this
purpose. Glass - Applications will be pre-glazed depending
on size..
Cleaning / Maintenance:
Cleaning - Thermoformed rooflights should be washed down with a mild detergent
and warm water. Do not use abrasives
Maintenance - Annually check mechanical components, and lubricate where necessary,
actuating components.
Other options
available:
This unit can be supplied in ‘adapter kerb profile’ (see data sheet). Anti
burglar and security options, such as ‘Burglar bars and security fixings’ are
available on request
Points To Check Prior To Advising Us
Of Your Requirements:
When placing an enquiry/order please be sure to
note the roof opening size, and where possible, the width of the upstand kerb.
Impact Test:
At the request of Nulite Ltd, B.R.E tested various sized samples of Domed roof
lights with either a PVC or steel upstand kerb, the test assesses the fragility
of the specimen roof lights when subjected to an impact by a large soft body
as in the standard ACR (m) 001:2000 (full deatils on the test report are
avilable on request).