Adaptor Kerb - NL616
|
Size Options:
Most sizes are available from our standard range, however specific design requirements
can be met to suit your needs, we also have a low profile design.
Ventilation:
Base kerb can be adapted to accomodate
most vent options from the standard range
Insulation:
Poly foam or PVC insulation can be fitted to the base kerb, as an option, to
suit your requirements.
Glazing Options:
Thermoformed rooflights - Single, Twin or Triple skin applications
from our standard range, 3mm U/V protected outer skin / 3mm thick inner skin.
Comes with a manufacturers discolouration and impact resistance guarantees.
Glass - Most applications can be incorporated.
Fixing Details:
The kerb is supplied fully assembled ready for fitment to roof structures,
the kerb should be fixed at the corners then 300mm centres. Thermoformed
Roof lights - Are supplied separately to kerbs and should be bolted
to the opening frame, sealer washers, caps and roofing bolts with nuts are
supplied as standard for this purpose.
Glass - Applications will be riveted or security bolted
as required.
Cleaning / Maintenance:
Cleaning - Thermoformed roof lights should be washed down with a mild detergent
and warm water. Do not use abrasives.
Maintenance - Annually check mechanical components, and lubricate where necessary,
actuating components.
Other options available:
Anti Burglar and Security options, such as Burglar bars and security fixings
are avilable on request.
Points to check prior to advising us
of your requirements:
When placing an enquiry/ order please be sure to note the roof opening size
, and where possible the width of the upstand kerb.